Roline Cable/DSL Router Guide de l'utilisateur télécharger pdf (Page 18)

Step. 3 Obtain IP Settings from Your Router

1. Click “Start,” then “Run…” Type “winipcfg” to open the IP Configuration utility.

2. Click the “Release All” button.

3. Click the “Renew All” button

4. Verify that your IP address is now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Default

Gateway is 192.168. 1.1. Click “OK” to close the “IP Configuration” window.

• Windows NT/2000/XP

Step 1. TCP/IP Configuration

After you have completed the hardware setup by connecting your devices, you need to

configure your computer to connect to your Router.

1. From the Windows desktop, click the “Start” button. Choose “Settings”, then click “Control Panel.”

2. From “Control Panel”, double-click the “Network & Dial-Up Connections” icon.

3. Double-click the icon that corresponds to the connection to your router.

4. Click “Properties” and double-click “Internet Protocol (TCP/IP).”

5. On the “Internet Protocol (TCP/IP) Properties” dialog box, make sure “Obtain an IP

address automatically” and “Obtain DNS server address automatically” are selected.

If not, select them and click “OK” and close window.

2 3

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Pas de commentaire

Roline Cable/DSL Router Guide de l'utilisateur Page 18